Description

Screen replacement precautions
Man-made damage due to improper operation, return and exchange are not supported

1 [Test]

Receive the screen to see if the appearance of the cable is intact, and the test shows that the touch is normal (the editable icon moves to each position on the screen when the touch is tested, the icon moves with the finger, and the touch is normal), and the test is performed before installation

2 [Cables]

The cable must be deducted in the off state. When buckling the cable, you should gently align the two sides. When the cable is properly buckled, there will be a crisp sound, and then press the four sides of the cable. Then press the iron block under the cable first. Bending the cable installation to avoid car damage to the cable. Before installation, remove the broken screen to practice pressing the cable, and then use the new screen to connect and test.

3 [Screw length]

The length of the screws is not the same. Where you remove them and put them back, otherwise you screwed the screen with the wrong screws and scrapped them. (The main screws pay attention to the two screws next to the front camera, the three screws on the home button, and 5 screws for the cable cover) Do not tighten the screws too much.

4 Before testing and installation, please be sure to watch the precautions and videos for changing the screen. Don’t take it too troublesome to avoid the loss caused by negligence.