Screen Replacement for iPhone 8 (4.7 inch) -3D Touch LCD Screen Digitizer Replacement Display Assembly Repair Kits
【 COMPATIBILITY】 ONLY for iPhone 8 4.7 inch screen ( Model A1863, A1905, A1906), does NOT work with 8 Plus 5.5 inch , you can check on the backside of your phone, please do not confuse it with other version
【GREAT REPLACEMENT】 USE to replace faulty,defective,cracked,dead iPhone 8 display screen full assembly. Professional instructions will save your big time to replace your old screen easily.
【ATTENTION】This iPhone 8 LCD is without home button,ear piece and front camera,you need to transfer from your old screen.
【QUALITY GUARANTEE】All iPhone 8 screen in 7iper pass strict technical tests before shipping to avoid happening of the black screen,ghost touch, stripe lines before shipping .180 days warranty for non-human factors. Full REFUND or REPLACEMENT service without ask any question, bz of quality.
【Packing】iPhone 8 screen replacement full assembly set, 9H hardness tempered glass screen protector and Repair tools are included.
Only for iPhone 8 (4.7 inch)
The screen replacement is without Ear Speaker, Front Camera, Proximity Sensor, LCD Metal Back Plate and Home Button, so please transfer them from your old screen to the new one .
1. Choose the RIGHT model and color
2. Make sure already disconnect battery cable or power off before installation. It could save your phone from short circuit or incorrect installation damage.
3. Please check the LCD and make sure the flex cable is in good condition and there is no debris on the connector.
4. The flex cable are very sensitive and frangible. DO NOT over-bend or use excessive force to tear it, Handle Carefully !
5. There are many screws when you replacing the assembly which are different in size and length. Make sure each screw are installed back to its ORIGINAL hole
6. Follow the Operation Guide or video online step by step if you are Beginner(also easy to install)
1 x lcd touch screen+digitizer assembly
1 x High Qulity Repair Tools Set
1 x Non-Dust Cloth
1 x Sim Card Pin
1 x Hardness Tempered Glass
1 x Instructions
If your phone have some problems after installed. For example, cannot turn on, no touch, no home button function, flashing, lines on screen etc., please follow these steps:
1. Reinstall all flex cables from the motherboard and double check all flex cable is in good condition.
2. Restart your phone: press home button and power button simultaneously till the phone shut down, after few mins, turn the phone on.
Please contact us if any product issue, we will do our best to provide good service for you.
|Dimensions||30 × 20 × 10 cm|
There are no reviews yet.